Evaluation of an Investment Casting Core: Cost, Benefits, and Technical Considerations

Background
Casting is one of the oldest forming techniques, having started with copper over 5000 years ago. In all that time, the basic process hasn’t changed by much – a molten liquid is poured into a ceramic or sand mold the shape of the desired part. The ceramics and process of making those molds, however, has evolved quite a bit. Investment casting is one of the most accurate casting processes, used to create complex and high quality parts that would be impossible using any other method. Whether it is aerospace, medical, or valving, the parts have grown in complexity and quality requirements. For most parts, a wax pattern is injected into a mold, which is then dipped into a ceramic slurry and coated to create that mold, after which the wax is melted out and the metal can be cast in.
For some parts, however, there is internal geometry that for one reason or another cannot be easily dipped or injected. These parts require ceramic cores, which can vary dramatically in complexity from simple rectangles to vastly complex components that require their own multi-step fabrication methods. Up until recently, these cores have had to be made by specialist manufacturers using ceramic injection molding, which for small runs can cost anywhere from $12,000 to $1.5 million and take anywhere from 4 months to 2 years to develop.
Ceramic 3D printing offers a cost effective alternative that can produce these cores, or even produce a combined core and shell, at a fraction of the cost and lead time. Sinto Advanced Ceramics stands ready to produce these parts in any volume, from a single part to hundreds or even thousands, helping to bridge the gap between prototype and production.
Case Study: Producing Cores for a Valve Body

Valves are among the most common parts made in the investment casting industry. The parts are difficult, if not impossible, to machine, since the majority of their geometry is internal to the body of the valve. This part is no different, utilizing a flow control system that maximizes the flow of the water when running, while also minimizing the size of the valve to ensure it fits into the space well.
Injecting this core is completely possible, but requires a tool steel mold costing around $50,000 to produce. In addition, the bulk of the part is solid, requiring a longer and more arduous process to remove the core after the casting process is completed. The lead time for that part was over 6 months to produce, making engineering cycle on these parts incredibly long.
Sinto Advanced Ceramics was able to quickly print, fire, and deliver these parts, going from design to sintered part in only a few weeks, which could then be seamlessly integrated with the investment casting process. This allowed the foundry to deliver parts to their customers in under 2 months, a feat that would have been otherwise impossible without 3D printing.
The core also exhibited some key improvements over the conventional molded core, particularly by being completely hollow, but also the long span of the main body was less prone to warpage than the injection molded components, resulting in a higher compatibility with the mold and less risk of cracking during the wax injection process.
To summarize:
| Ceramic Injection Molding | 3D Printing |
|---|---|
| $50,000 for 1st core | $500 for 1st core |
| $185/ea for 1 year run of 300 | $120/ea for 1 year run of 300 |
| 6 months (+) for 1st core | 3 weeks for 1st core |
| Solid Internal Architecture | Hollow Internal Architecture |
| Leach time 6 hours | Leach time 30 minutes |
| +/- 0.1 mm accuracy | +/- 0.08 mm accuracy |
Sinto Advanced Ceramics, USA
If any of this is of interest to you, we encourage you to reach out to our engineers and sales representatives. They are experts in the field of ceramic 3D printing, and are happy to help you to realize your ceramic part needs.
Learn more about Sinto Advanced Ceramics USA online here.
Want to know about 3d printing ceramic cores?