For separating and reclaiming chromite sand with purity levels greater than 98%. Integrated system incorporates both magnetic and density rejection to provide consistent returns for your process. Requirements for chromite concentration in the supply and sized for bulk processing rates. Turn-key options available.
Cooler Classifier 1-30 TPH
The G-Cooler is a fluidized-bed design that incorporates highly-efficient heat transfer to cool the reclaimed sand. Can be provided with or without cooling coils if classification is the goal. Intense fluidization helps classify the fines from the return sand. Integral drop-out chamber and designed to discharge directly into the PV-pneumatic transporter.
GM Combination Shakeout and Reclamation 15-20 TPH
For Larger Loading and Reclamation rates, the GammaMajor-Series incorporates a shakeout deck with additional screens to reduce larger molds to grain-size sand. Additional final screening may be required. Easily integrated with other equipment for a complete sand reclamation system.
GM+ Combination Shakeout and Reclamation 25-45 TPH
For the Largest Molds, the GammaMajor Plus for maximum loading and throughput while still maintaining some attrition capabilities. With dual-pre-cleaners and automated cleanout, helps to reduce the load for down-stream attrition requirments.
Greensand to Core Reclamation
For Reducing clay and organic materials in your Reclaim Greensand to reuse back in the core production or new sand addition to your greensand system. With features to reclaim the greensand additives for reuse. Integrated drying, scrubbing and cooling equipment to produce consistent results on a continuous operation basis.
GV Combination Shakeout and Reclamation 1-3 TPH
For Reclamation of Smaller No-bake Molds, our Gammavator incorporates our Multiple Screen attrition process with a vibratory elevator for discharge into storage or into a hopper for pneumatic transport. Optional Discharge Fluidization for classification of fines.
HL ‘High Level’ Combination Shakeout and Reclamation 6-30 TPH
Our HL-Series is an Attrition Mill only without any shakeout capabilities. Sand pieces are loaded into the tub and using our attrition screen system reduces to grain-size. Clamp-on doors for ease of cleanout. Elevated discharge for feeding into pneumatic transport and optional Discharge Fluidization is available.
Inorganic Reclamation
For the reclamation of inorganic binders, our system combines drying and mechanical scrubbing to remove inorganic resin from sand grains. Can be provided with attrition mill for generating the required grain-size sand.
LL ‘Low Level’ Combination Shakeout and Reclamation 6-15 TPH
For Shake-out and Attrition of No-bake Sand Molds. Our Low Level 'LL'-Series of mechanical reclaimers provides the utility of a shake-out deck with the proven attrition screening system to expose your casting and reduce your molds to grain size, all without pits. The sand can then be cooled, classified or just transported back to the mixer or for additional reclamation.
No Bake Core Shooters
For the production of Cores using the same resin as the molds. Can work with a variety of tooling and resin systems, the cors are blown in batches and allowed to cure before being stripped and the tooling returned for another cycle. Integrated batch timers to know when the sand life is exhausted and Recipe sand mixing with optional integrated sand mixer.
Pneumatic Sand Transporter
Dense-phase Pneumatic Sand Transporter. The PV-Series sends the load of sand to a destination before refilling to send the next batch. The transport pipe remains empty for less hanging load. Can transport multiple materials to multiple destinations without contamination. Sized based on throughput and transport line size.
Shakeout Decks
When looking for a Lump Breaker, our Shake-out Decks can handle the higher loads and throughputs while leaving the pieces small enough for reduced load on the attrition mill. Built with vibratory motors or a shaft-driven exciter, these units can handle the largest molds.
Thermal Reclamation
For removing all of the organic resin from your rclaimes sand and returning 'Better-than-New' quality for all your new sand needs. Our Dead-Bed design reduces the need for special materials of construction while providing no thermal shock to the calcining chamber. Can be operated on an hourly, shift or campaign basis without harming the system. No moving parts in the calcining chamber for less maintenance and our industry-leading 3-year warranty for the inside of the calcining bed. Engineered design for your resin system and content. Can be provided with all components for a complete reclamation system.
USR Secondary Attrition
USR Secondary Attrition for the reduction of LOI by mechanical processing of the sand, without damaging the sand. Mechanical scrubbing is provided by pneumatically-controlled pinch rollers with the ability of adjusting the force and the intensity of the scrubbing action. Good for all organic and inorganic resins.
