ACE Series
ACE Series, compact Tight Flask Molding Machine offers the next level casting production with its’ innovative technology using Aeration Sand Filling.
FEATURES:
- Aeration Sand filling technology and adjustable zone squeeze pressure technology achieves uniformly dense molds & dimensional precise castings
- Average maximum mold rate of 150 molds/hour with single station or 240 molds/hour with twin type station
- Spill sand is eliminated and cut-off sand is minimized allowing for lower sand preparation requirements
- Excellent pattern draw by leveling frame
- Simple design allows for ease of maintenance and low energy consumption
- Compact size for reduced installation space
Specifications
ACE Seiatsu Tight Flask Molding Series
| Specifications | Models | ||||||||
| ACE-3 | ACE-4 | ACE-5 | ACE-6 | ACE-7 | |||||
| Mold Size | Width x Length | 25.5" X 27.5" (650 mm x 700 mm) | 25.5" x 33" (650 mm x 850 mm) | 31.5" x 39" (800 mm x 1000 mm) | 35" x 51" (900 mm X 1300 mm) | 47" x 59" (1200 mm x 1500 mm) |
|||
| Height | 5.9" - 7.8" (150 mm-200 mm) | Up to 9.8" (250 mm) | 9.8"" - 11.8"" (250 mm-300 mm) | Up to 9.8" (250 mm) " | 9.8" - 11.8" (250 mm-300 mm) | Up to 11.8" (300 mm) | 11.8" - 13.7" (300 mm-350 mm) | Up to 13.7" (350 mm) |
|
| Average Maximum Molding Rate | 150 molds/hour (24 seconds/mold) | 150 molds/hour (24 seconds/mold) | 135 molds/hour (27 seconds/mold) | 144 molds/hour (26 seconds/mold) | 130 molds/hour (28 seconds/mold) | 120 molds/hour (30 seconds/mold) | 108 molds/hour (34 seconds/mold) | 80-90 molds/hour (40-45 seconds/mold) |
|
| Molding System | Aeration Sand Filling + Combination Squeeze (Plain Squeeze + Leveling Squeeze | ||||||||
Options
- – Wear-resistent leveling seal for pattern bolster
- – Auto pattern changer
- – Wear-resistent nozzle
- – Pattern heater
- – Hydraulic pre-set pad
- – Additional pattern bolster
- – Clamp-type pattern bolster