HSP Series
The HSP Series Tight Flask Molding line are self-contained units with integrated hydraulic system and electronic control used for small to medium casting production.
FEATURES:
- 2-station molding machine with pattern turntable for alternate production of cope and drag molds
- Average maximum mold rate of 70 molds/hr
- Air-flow technology allows for consistent production of highly dimensional & accurate castings
- Molding flask handling by hydraulic cylinder or electric motors on roller conveyors
- Suitable for hand packing chills, open top feeder/riser setting or facing sand
- Sand fill by hopper, discharge belt or batch hopper
HSP Specifications
HSP
| Specifications | Model | |||
| HSP-1 | HSP-2 | HSP-3 | ||
| Mold Size | Width x Length | 25.5" x 20" (650 mm x 500 mm) | 31" x 25.5" (800 mm x 650 mm) | 39" x 31" (1000 mm x 800 mm) |
| Height | 6" - 10" (150 mm - 250 mm)" | 6" - 14" (150 mm - 350 mm) | 6" - 16" (150 mm - 400 mm) |
|
| Molding Rate | 35 molds/hour | 25 molds/hour | 18 molds/hour |
|
| Molding System | Air Flow + Squeeze | |||
HSP-D Specifications
HSP-D
| Specifications | Model | ||||
| HSP-1D | HSP-2D | HSP-3D | HSP-4D | ||
| Mold Size | Width x Length | 25.5" x 20" (650 mm x 500 mm) | 31" x 25.5" (800 mm x 650 mm) | 39" x 31" (1000 mm x 800 mm) | 49" x 39" (1250 mm x 1000 mm) |
| Height | 6" - 12" (150 mm - 300 mm)" | 6" - 14" (150 mm - 350 mm) | 6" - 16" (150 mm - 400 mm) | 5.5" - 18" (140 mm - 450 mm) |
|
| Molding Rate | 70 molds/hour | 60 molds/hour | 50 molds/hour | 40 molds/hour |
|
| Molding System | Air-Flow + Squeeze | ||||
Options
- – Fine Sand Slinger
- – Automatic Pattern Changer
- – Diaphragm Squeeze
- – Multi-ram Press
- – Pattern Heater