ACE Series

ACE Series, compact Tight Flask Molding Machine offers the next level casting production with its’ innovative technology using Aeration Sand Filling.

FEATURES:

  • Aeration Sand filling technology and adjustable zone squeeze pressure technology achieves uniformly dense molds & dimensional precise castings
  • Average maximum mold rate of 150 molds/hour with single station or 240 molds/hour with twin type station
  • Spill sand is eliminated and cut-off sand is minimized allowing for lower sand preparation requirements
  • Excellent pattern draw by leveling frame
  • Simple design allows for ease of maintenance and low energy consumption
  • Compact size for reduced installation space

Specifications

ACE Seiatsu Tight Flask Molding Series

Specifications Models
ACE-3 ACE-4ACE-5ACE-6 ACE-7
Mold Size Width x Length 25.5" X 27.5"
(650 mm x 700 mm)
25.5" x 33"
(650 mm x 850 mm)
31.5" x 39"
(800 mm x 1000 mm)
35" x 51"
(900 mm X 1300 mm)
47" x 59"
(1200 mm x 1500 mm)
Height 5.9" - 7.8"
(150 mm-200 mm)
Up to 9.8"
(250 mm)
9.8"" - 11.8""
(250 mm-300 mm)
Up to 9.8"
(250 mm) "
9.8" - 11.8"
(250 mm-300 mm)
Up to 11.8"
(300 mm)
11.8" - 13.7"
(300 mm-350 mm)
Up to 13.7"
(350 mm)
Average Maximum Molding Rate
150 molds/hour
(24 seconds/mold)
150 molds/hour
(24 seconds/mold)
135 molds/hour
(27 seconds/mold)
144 molds/hour
(26 seconds/mold)
130 molds/hour
(28 seconds/mold)
120 molds/hour
(30 seconds/mold)
108 molds/hour
(34 seconds/mold)
80-90 molds/hour
(40-45 seconds/mold)
Molding System Aeration Sand Filling + Combination Squeeze (Plain Squeeze + Leveling Squeeze

Options

  • – Wear-resistent leveling seal for pattern bolster
  • – Auto pattern changer
  • – Wear-resistent nozzle
  • – Pattern heater
  • – Hydraulic pre-set pad
  • – Additional pattern bolster
  • – Clamp-type pattern bolster

Video

Request More Info

Specs